CHEVRON PRODUCTS COMPANY LUBRICANTS AND SPECIALTY PRODUCTS -- CHEVRON DELO 400 -- 9150-00-189-6729 
=====================  Product Identification  =====================

Product ID:CHEVRON DELO 400
MSDS Date:11/08/2000
FSC:9150
NIIN:00-189-6729
Status Code:A
=== Responsible Party ===
Company Name:CHEVRON PRODUCTS COMPANY LUBRICANTS AND SPECIALTY PRODUCTS
Address:6001 BOLLINGER CANYON RD
City:SAN RAMON
State:CA
ZIP:94583
Country:US
Info Phone Num:800-231-0623
Emergency Phone Num:(800)424-9300
Chemtrec Ind/Phone:(800)424-9300
CAGE:81230
=== Contractor Identification ===
Company Name:CHEVRON PRODUCTS COMPANY LUBRICANTS AND SPECIALTY PRODUCTS
Address:6001 BOLLINGER CANYON RD
Box:City:SAN RAMON
State:CA
ZIP:94583
Country:US
Phone:800-414-6737 / 800-582-3835
CAGE:81230

=============  Composition/Information on Ingredients  =============

Ingred Name:LUBRICATING BASE OIL SEVERLY REFINED PETROLEUM
    DISTILLATE(SEE SUPPLEMENTAL DATA)
> Wt:75.
Other REC Limits:ACGIH TWA GM5/M3MIST
OSHA PEL:5 MG/M3 (MIST)
OSHA STEL:10 MG/M3( MIST)

Ingred Name:PHOSPHORODITHIOIC ACID, O,O-DI-C1-14-ALKYL ESTERS, ZINC
    SALTS
CAS:68649-42-3
< Wt:1.6

Ingred Name:NON SPECIFIED ADDITIVES
< Wt:25.

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:NO    IARC:NO
Health Hazards Acute and Chronic:EYE: NOT EXPECTED TO CAUSE PROLONGED
    OR SIGNIFICANT EYE IRRITATION. SKIN: CONTACT WITH THE SKIN IS NOT
    EXPCTED TO CAUSE PROLONGED OR SIGNIFICANT IRRITATION.  NOT EXPECTED
    TO BE HARMFUL TO INTERNAL ORG ANS IF ABSORBED THROUGH THE SKIN.
    INGESTION: NOT EXPECTED TO BE HARMFUL IF SWALLOWED. INHALATION:
    CONTAINS A PETROLEUM-BASED MINERAL OIL. MAY CAUSE RESPIRATORY
    IRRITATION OR OTHER PULMONARY EFFECTS FO LLOWEING PROLONGED OR
    REPEATED INHALATION OF OIL MIST AT AIRBORNE LEVELS ABOVE THE
    RECOMMENDED MINERAL OIL MIST EXPOSURE LIMIT.
Effects of Overexposure:EYE: NOT EXPECTED TO CAUSE PROLONGED OR
    SIGNIFICANT EYE IRRITATION. SKIN: CONTACT WITH THE SKIN IS NOT
    EXPCTED TO CAUSE PROLONGED OR SIGNIFICANT IRRITATION.  NOT EXPECTED
    TO BE HARMFUL TO INTERNAL ORG ANS IF ABSORBED THROUGH THE SKIN.
    INGESTION: NOT EXPECTED TO BE HARMFUL IF SWALLOWED. INHALATION:
    CONTAINS A PETROLEUM-BASED MINERAL OIL. MAY CAUSE RESPIRATORY
    IRRITATION OR OTHER PULMONARY EFFECTS FO LLOWEING PROLONGED OR
    REPEATED INHALATION OF OIL MIST AT AIRBORNE LEVELS ABOVE THE
    RECOMMENDED MINERAL OIL MIST EXPOSURE LIMIT.

=======================  First Aid Measures  =======================

First Aid:EYE: NO SPECIFIC FIRST AID MEASURES ARE REQUIRED BECAUSE THIS
    MATERIAL IS NOT EXPECTED TO CAUSE EYE IRRITATION. AS A PRECAUTION
    REMOVE CONTACT LENSES, IF WORN, AND FLUSH EYES WITH WATER. SKIN:
    THIS  M ATERIAL IS NOT EXPECTED TO BE HARMFUL IF IT CONTACTS THE
    SKIN. AS A PRECAUTION, REMOVE CLOTHING AND SHOES IF CONTAMINATED.
    WASH SKIN WITH SOAP AND WATER. WASH OR CLEAN CONTAMINATED CLOTHING
    AND SHOES  BEFORE REUSE. INGESTION;THIS MATERIAL IS NOT EXPECTED TO
    HARMFUL IF SWALLOWED, DO NOT INDUCE VOMITING.GIV THE PERSON A GLASS
    OF WATER OR MIK TO DRINK AND GET MEDICAL ADVICE. INHALATION; MOVE
    THE EXPOS ED PERSON TO FRESH AIR.GET MEDICAL ATTEN

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:=200.C, 392.F
Autoignition Temp:Autoignition Temp Text:NDA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:THIS MATERIAL WILL BURN  ALTHOUGH IT IS NOT
    EASILY IGNITED. FOR FIRES INVOLVING THIS MATERIAL, DO NOT ENTER ANY
    ENCLOSED OR CONFINED FIRES SPACE WITHOUT PROPER PROTECTIVE
    EQUIPMENT, INCLUDING SELF-CON TAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NORMAL COMBUSTION FORMS CARBON DIOXIDE
    AND WATER VAPOR AND MAY PRODUCE OXIDES OF SULFUR, NITROGEN,
    PHOSPHORUS, AND BORON. INCOMPLETE COMBUSTION CAN PRODUCE CARBON
    MONOXIDE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP THE SOURCE OF THE LEAK OR RELEASE. CLEAN
    UP RELEASES AS SOON AS POSSIBLE. CONTAIN LIQUID TO PREVENT FURTHER
    CONTAMINATION OF SOIL, SURFACE WATER OR GROUNDWATER . CLEAN UP
    SMALL SPILLS USING APPRO PRIATE TECHNIQUES SUCH AS SORBENT
    MATERIALS OR PUMPING. WHERE FEASIBLE AND APPROPRIATE, REMOVE
    CONTAMINATED SOIL. FOLLOW PRESCRIBED PROCEDURES FOR REPORTING AND
    RESPONDING TO LARGER RELEASES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CONTAINER IS NOT DESIGNED TO CONTAIN
    PRESSURE. DO NOT USE PRESSURE EMPTY CONTAINER OR IT MAY RUPTURE
    WITH EXPLOSIVE FORCE. EMPTY CONTAINERS RETAIN PRODUCT RESIDUE
    (SOLID, LIQUID, AND/OR VAPOR) AND CAN  BE DANGEROUS. DO NOT
    PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, (SEE BELOW,
    OTHER PRECAU)
Other Precautions:OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS,
    STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION. THEY MAY EXPLODE
    AND CAUSE INJURY OR DEATH. EMPTY CONTAINERS SHOULD BE COMPLETELY
    DRAINED, PROPERLY  CLOSED, AND PROMPTLY RETURNED TO A DRUM 
    RECONDITIONER, OR PROPERLY DISPOSED OF.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NO RESPIRATORY PROTECTION IS NORMALLY REQUIRED.
    IS USER OPERATIONS GENERATE AN OIL MIST, DETERMINE IF AIRBORNE
    CONCENTRATIONS ARE BELOW THE RECOMMENDED MINERAL OIL MIST EXPOSURE
    LIMITS. IF NOT WEAR A  NIOSH APPROVED RESPIRATOR THAT PROVIDES
    ADEQUATE PROTECTION FORM MEASURED CONCENTRATIONS OF THIS
    MATERIAL.USE AIR-PURIFYING RESPIRATOR: PARTICULATE.
Ventilation:LOCAL EXHAUST.
Protective Gloves:VITON, NITRILE, SILVER SHIELD, 4H.
Eye Protection:WHERE SPLASHING IS POSSIBLE: SAFETY GLASSES WITH SIDE
    SHIELDS
Supplemental Safety and Health
THE BASE OIL MAY BE A MIXTURE OF THE FOLLOWING; CAS
    64741884,CAS64741895,CAS64741964,CAS64741975,CAS64742014,CAS6474252
    5,CAS64742536,CAS64742547,CAS64742627,CAS64742650,OR CAS 72623837.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:>315.6C, 600.F
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:<0.01 MMHG @100F
Vapor Density:>AIR
Spec Gravity:0.87-0.89
VOC Pounds/Gallon:9
pH:NA
Viscosity:5.9-18.6 CST@100C
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK BROWN LIQUID

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS, SUCH AS CHLORATED, NITRATES,
    PEROXIDES, ETC.
Stability Condition to Avoid:NO DATA AVAILABLE
Hazardous Decomposition Products:H2S MAY BE RELEASED AT HIGH
    TEMPERATURES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

===================  Toxicological Information	===================

Toxicological Information:THIS PRODUCT CONTAINS PETROLEUM BASE OILS
    WHICH MAY BE REFINED BY VARIOUS PROCESSES INCLUDING SEVERE SOLVENT
    EXTRACTION, SEVERE HYDROCRACKING, OR SEVERE HYRDOTREATING.NONE OF
    THE OILS REQUIRES A CANCE R WARNING UNDER THE OSHA HAZARD
    COMMUNICATION STANDARD (29 CFR 1910.1200).THESE OILS HAVE NOT BEEN
    LISTED IN THE NATIONAL NTP ANNUAL REPORT NOR HAVE THEY BEEN
    CLASSIFIED BY IARC AS CARCINOGENIC TO HUM ANS. THIS PRODUCT
    CONTAINS ZINC ALKYL DITHIOPHOSPHATES(ZDDP).SEVERAL ZDDP HAVE BEEN
    REPORTED TO HAVE AWEAK MUTAGENIC ACTIVITY IN CELLS. USED MOTOR OILS
    CAUSES CANCER IN MICE IN CONTINUOUS EXPOSURE.

=====================  Ecological Information  =====================

Ecological:THE TOXICITY OF THIS MATERIAL TO ACQUATIC ORGANISMS HAS NOT
    BEEN EVALUATED. CONSEQUENTLY THIS MATERIAL SHOULD BE KEPT OUT OF
    SEWAGE AND DRAINAGE SYSTEMS AND ALL BODIES OF WATER. THIS MATERIAL
    IS NOT E XPECTED TO BE READILY BIODEGRADABLE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:OIL COLLECTION SERVICES AND COLLECTION CENTERS
    ARE AVAILABLE FOR USED MOTOR OIL RECYCLING OR DISPOSAL. PLACE
    CONTAMINATED MATERIALS IN CONTAINERS AND DISPOSE OF IN A MANNER
    CONSISTENT WITH APPLICABLE	REGULATIONS. CONTACT YOUR SALES
    REPRESENTATIVE OR LOCAL ENVIRONMENTAL OR HEALTH AUTHORITIES FOR
    APPR OVED DISPOSAL OR RECYCLING METHODS.

===================  MSDS Transport Information  ===================

Transport Information:DOT SHIPPING NAME: NONE. DOT HAZARD CLASS: NONE.
    DOT IDENTIFICATION NUMBER:NONE. ADDITIONAL INFO: PETROLEUM
    LUBRICATING OIL-NOT HAZARDOUS BY U.S.DOT.AIR/RID CLASS-NOT
    APPLICABLE.

=====================  Regulatory Information  =====================

SARA Title III Information:IMMEDIATE (ACUTE) HEALTH EFFECTS:NO. DELAYED
    (CHRONIC) HEATH EFFECTS:NO FIRE HAZARD:NO SUDDEN RELEASE OF
    PRESSURE HAZARD:NO. REACTIVITY HAZARD:NO
Federal Regulatory Information:THE FOLLOWING COMPONENTS OF THIS MATEIAL
    ARE FOUND ON THE REGULATORY LISTS INDICATED. PHOSPHORODITHIOC
    ACID,O,O-DI-CI-14-ALKYL ESTERS, ZINC SALTS IS FOUND ON LISTS 01,11,
    SEVERLY REFINED PETROLEUM DIS TILLATE IS FOUND ON LISTS 14,15,17,
    NEW JERSEY RTK CLASSIFICATION: UNDER THE NEW JERSEY RIGHT TO KNOW
    ACT L. 1983 CHAPTER 315 N.J.S.A.34:5A-1 ET.SEQ., THE PRODUCT IS TO
    BE IDENTIFIED AS FOLLOWS: PETRO LEUM OIL.WHMIS CLASSIFICATION: THIS
    PRODUCT IS NOT CONSIDERED A CONTROLLED PRODUCT ACCORDING TO THE 
    CRITERIA OF THE CANADIAN CONTROLLED PRODUCTS REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.