PENGUIN INDUSTRIES INC -- HOPPE'S 9 LUBRICATING OIL  -- 9150-00N057530
<pre>=====================  Product Identification  =====================

Product ID:HOPPE'S 9 LUBRICATING OIL
MSDS Date:09/05/1989
FSC:9150
NIIN:00N057530
=== Responsible Party ===
Company Name:PENGUIN INDUSTRIES INC
Address:AIRPORT INDUSTRIAL MALL
City:COATESVILLE
State:PA
ZIP:19320
Country:US
Info Phone Num:215-384-6000
Emergency Phone Num:215-384-6000
CAGE:6Y224
=== Contractor Identification ===
Company Name:PENGUIN INDUSTRIES INC
Address:AIRPORT INDUSTRIAL MALL
Box:City:COATESVILLE
State:PA
ZIP:19320
Country:US
Phone:215-384-6000
CAGE:6Y224

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL OIL; (WHITE MINERAL OIL)
CAS:8012-95-1
RTECS #:PY8030000
Fraction by Wt: 100%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3 (MIST)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY CAUSE MILD IRRITATION.
    INHAL:NONE EXPECTED TO 25 MG OIL MIST PER CUBIC METER OF AIR.
    EYES:MAY CAUSE MILD IRRITATION & REDNESS. SKIN:PRACTICALLY
    NON-TOXIC BY ABSORPTION. NO EFFECTS EXPECTED.  INGEST:MAY CAUSE GI
    IRRITATION. CHRONIC:MAY CAUSE DERMATITIS IN SENSITIVE INDIVIDUALS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:MAY CAUSE AN ALLERGIC REACTION IN
    SUSCEPTIBLE INDIVIDUALS.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
    MINUTES. SKIN:WASH W/SOAP & WATER. INGEST:GIVE LARGE AMOUNTS OF
    MILK OR WATER. DO NOT GIVE ANYTHING TO AN UNCONSCIOUS PERSON.
    INHAL:REMOVE VICTIM  TO FRESH AIR. IF BREATHING IS DIFFICULT, GIVE
    OXYGEN. CALL MD. CONTACT POISON CONTROL CENTER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:425F,218C
Extinguishing Media:WATER FOG, CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:SLIGHT FIRE HAZARD WHEN EXPOSED TO HEAT,
    SPARKS & OPEN FLAME.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ASSURE SLIPPERY CONDITIONS ARE NULLIFIED.
    CLEAN UP USING OIL ABSORBENT. PLACE IN PROPER CONTAINER. FLUSH AREA
    W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
    USE. DO NOT HANDLE OR STORE NEAR HEAT, FLAME, SPARKS, FIRE &
    OXIDIZERS. STORE AS NFPA CLASS IIIB.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:CONCENTRATION IN AIR DETERMINES PROTECTION
    REQUIRED. NIOSH/MSHA APPROVAL ON ANY RESPIRATORY EQUIPMENT USED. 29
    CFR 1910.132, 1910.133, 1910.134 IF RESPIRATOR IS USED.
Ventilation:USE GENERAL VENTILATION TO PROTECT YOUR LUNGS.
Protective Gloves:OIL IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EYE  & HAND WASH. IF CONTACT IS
    UNAVOIDABLE, WEAR APPROP OIL IMPERVIOUS CLTHG. OTHER PROT (SUPDAT)
Work Hygienic Practices:WASH THORO AFTER HNDLG. USE NORMAL HYGIENE TO
    PROT HANDS, EYES & SKIN. DO NOT WEAR CONTAM CLTHG UNTIL THORO
    LAUNDERED.
Supplemental Safety and Health
OTHER PROT EQUIP: CLTHG/EQUIP: AS NEEDED TO PREVENT REPEATED OR
    PROLONGED CONTACT.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:571F,299C
Vapor Density:>8
Evaporation Rate &amp; Reference:1000X SLOWER/ETHYL ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORLESS FLUID; LITTLE TO NO ODOR.
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZERS.
Stability Condition to Avoid:EXTREME HEAT, SPARKS, OPEN FLAMES.
Hazardous Decomposition Products:MAY GIVE OFF FUMES OF CARBON MONOXIDE
    & OTHER ASPHYXIANTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS. ASSURE CONFORMITY W/APPLICABLE DISPOSAL REGULATIONS.
    DISPOSE OF ABSORBED MATL AT APPROVED INCINERATION OR CHEMICAL
    LANDFILL WASTE DISPOSAL SITE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.